You hand someone your NFC business card. They hold it against their phone, and nothing happens. No banner, no web page, just a few awkward seconds of turning the phone over. Or it opens on your phone every time and never on theirs.
A typical NFC business card has a small chip that stores one thing, usually a web link. A phone that is listening for NFC reads the link when it comes close enough and offers to open it. So a failed tap comes down to four things: the phone isn't listening, the card isn't in the right spot, the chip doesn't hold a link the phone can use, or the link leads nowhere.
Make a free OneSol digital business card. It's a link and a QR code that open in any phone's camera and browser, iPhone or Android, and one tap saves you to their contacts.See the free card →First, find out whether it's the card or the phone
Two quick tests save a lot of guessing.
- Tap the card on a second phone, ideally one iPhone and one Android. If it opens on one and not the other, the card is fine and the problem is that phone's model or settings.
- If it fails on every phone, the problem is the chip or the link on it. Skip to the section on the card itself.
- Ask what the person saw. Nothing at all points to the phone or the position. A page that loads with an error means the chip worked and the link is the problem.
iPhone: check whether the model reads tags by itself
Apple splits iPhones into two groups. Its iPhone User Guide lists iPhone XR, XS and XS Max, the iPhone 11, 12 and 13 families and iPhone SE (2nd generation and later) as models that automatically support NFC Tag Reader, and its Core NFC developer documentation says iPhone XS and later support background tag reading. On those phones there is nothing to switch on, and no NFC toggle in Settings to look for.
The second group is iPhone 7, 7 Plus, 8, 8 Plus and X. For these, Apple says to turn on NFC Tag Reader in Control Center. The phone won't react to a card on its own: open Control Center, tap 'NFC Tag Reader', then hold the top of the iPhone to the card. If the control is missing, add it from Settings > 'Control Center'.
Apple's lists start at iPhone 7. An older iPhone isn't one Apple lists for reading tags, so use the QR code instead.
iPhone: wake it, tap the notification, and know when reading is off
Apple's developer documentation says that, to avoid accidental reads, the iPhone reads tags in the background only when it is in use. The screen needs to be on. A phone lying dark on the table won't react.
It also doesn't jump straight to the page. Apple says the system displays a pop-up notification each time it reads a new tag, and the link opens, in Safari if no installed app claims it, only after you tap that notification. A locked iPhone asks to be unlocked first. A lot of 'it didn't work' is a notification that came and went while both of you were looking at the card.
Apple also lists times when the display is on and background reading is still unavailable. If one of these is true, fix it and tap again:
- The iPhone has never been unlocked since it was restarted.
- An app is running its own NFC scan (Apple calls this a Core NFC reader session).
- Apple Pay Wallet is in use.
- The camera is in use, for example straight after scanning a QR code.
- Airplane mode is turned on.
Android: NFC is switched off, or the phone doesn't have it
Unlike iPhone, Android phones have an NFC switch, and it can be off. Google's Android developer documentation says phones are usually looking for NFC tags when the screen is unlocked, unless NFC is disabled in Settings. So NFC has to be on, and the phone awake and unlocked.
Menu names differ between brands. Google's quickest route works on most phones: open Settings, type 'NFC' in the search bar and make sure the setting is on. Also note that, according to Google's developer documentation, from Android 17 a tag holding a web link shows an 'open link' notification, and the page opens only when the person taps it.
- Google Pixel: open Settings, tap 'Connected devices', then 'Connection preferences', then 'NFC', and turn on 'Use NFC'.
- Samsung Galaxy: go to Settings > 'Connections' > 'NFC and contactless payments' and turn it on. Samsung also shows an 'NFC' button in the Quick settings panel, opened by swiping down from the top right corner of the screen; if it's missing, tap 'Edit', then 'Add a control', then 'NFC'. If NFC is already on, Samsung says turning it off and back on may help.
- No NFC setting anywhere: Google's help says that if you don't see the NFC setting, your phone doesn't have NFC. That phone needs the QR code.
Hold it in the right spot, and take the case off
Google's documentation notes that phones scan NFC tags at a very short range, and the antenna isn't under the whole phone. Moving the card slowly over the phone usually finds it, but it helps to know where to aim.
- iPhone: Apple's Apple Pay steps say to hold the top of your iPhone near the contactless reader. Use the same spot for a card, and hold it still for a moment.
- Google Pixel: Google says, 'To learn exactly where your phone's NFC sensor is, look at a diagram of your phone.' Its 'Pixel phone hardware diagram' page marks the spot for each model, and it isn't the same on every Pixel.
- Samsung Galaxy: Samsung says to place the area marked for NFC detection close to the reader, and points to the on-screen guide in Settings > 'Connections' > 'NFC and contactless payments' for placement.
- Phone cases: Samsung warns that some non-genuine covers or cases, especially those containing magnets, cards or metal materials, may interfere with NFC, as can thick cases. Take the case off and try again.
- Wallet cases: Google's Pixel help says that if the NFC sensor is near a payment card or other item with an NFC chip, it will continually try to work with that chip. It suggests removing a wallet-style case that holds cards.
The card itself: blank, the wrong data, locked, or a dead link
If the card fails on every phone, look at what's on it. Phones open the link only when it is stored in the standard NFC data format, NDEF, as a link (URI) record. Apple's Core NFC documentation says background reading looks for a URI record, uses the first one if there are several, and supports website links starting with http or https, plus a few others such as mailto, sms and tel. Google's documentation says Android reads the first record on the tag to work out what it holds.
- It's blank. Google's developer reference notes a tag can be formatted for NDEF and still not contain a message. There is nothing for the phone to open, so write your link to it.
- It holds something other than a web link, such as plain text or a link only one app understands. Apple says background tag reading doesn't support custom URL schemes. Rewrite it with a full https:// address.
- It reads on some Android phones and not others. Google recommends NFC Forum tag types 1 to 4 and says vendor NDEF formats will not work on all Android devices. A different tag is the fix.
- It's locked. Tags can be made read-only, and Google's developer reference calls this a one-way process that cannot be reverted. A locked tag still reads, but if it holds the wrong link it can't be corrected. Replace the card.
- The link is dead. If a page opens with an error or the wrong content, the chip did its job. Type the address into a browser to confirm. If it points to a profile hosted by the company that made the card, it only works while that account does, so rewrite the tag with a link you control if it isn't locked.
Make it work next time: carry a QR code and a link
NFC depends on the model, a setting, the right spot and the case, all on a phone that isn't yours. A QR code skips every one of those. Apple's instructions are to open the Camera app, hold the iPhone so the QR code appears, then tap the link. On a Pixel, Google says the Camera app is the easiest way to scan a QR code.
- Print the same link as a QR code on the back of the card, or on a sticker next to the chip.
- Keep the plain link in a note, ready to paste for anyone who would rather get it as a message.
- Use the exact same full https link for the tag and the QR code, so every route ends on the same page.
- Before an event, test the card on one iPhone and one Android phone, cases on, and test again whenever you change the link.
Where OneSol fits
OneSol doesn't sell NFC cards or tags. Its free digital business card is a link with its own QR code, so it opens in the camera and browser of any iPhone or Android with no app, and its 'Save contact' button lets people add you to their contacts. If you already own an NFC tag that can hold a web link, you can write your card's link to it and keep the QR code as the backup that works on every phone.
