You hold your Popl to someone's phone and nothing happens. Or they scan your Popl QR code and get 'Profile not found'. Or the card opens, they tap 'Save Contact', and your number never reaches their contacts. It usually isn't the device.
The quick answer: a failed pop usually comes from the other phone, such as an Android with NFC switched off, an iPhone that is too old or has its camera open, or a tap in the wrong spot. The rest are settings on your Popl account. In the moment, show your QR code and fix the cause later.
- The tap does nothing on an Android phone: cause 1.
- The tap does nothing on an iPhone: cause 2.
- It never works, or opens someone else's card: cause 3.
- The QR code won't scan, or says 'Profile not found': cause 4.
- They get a form, a single link or an empty contact: cause 5.
- You can't sign in or save edits in the app: cause 6.
Cause 1: The Android phone has NFC turned off
A Popl works by NFC, the short-range radio phones use to pay at a terminal. Popl notes that some Android phones are compatible but have NFC turned off in phone settings, and Google's developer documentation says Android phones usually look for NFC tags only when the screen is unlocked.
- On a Google Pixel: open Settings, tap 'Connected devices', then 'Connection preferences', then 'NFC', and turn on 'Use NFC'.
- On other Android phones: Google's help says to open Settings, type 'NFC' in the search bar and make sure it is toggled on. If there is no NFC setting at all, the phone has no NFC, so use your QR code.
- Wake and unlock the phone, then hold the Popl against the middle of the back for a few seconds. Popl's activation guide uses that spot, and Google says the antenna could be near the top or middle.
- Look for a notification. Google's developer documentation says that from Android 17, a tag holding a web link shows an 'open link' notification the person has to tap.
Cause 2: The iPhone can't read the tap right now
Popl's help says the other person doesn't need the Popl app, so the iPhone has to read the tap by itself. Apple calls this background tag reading and says it is supported on the iPhone XS, iPhone XS Max and iPhone XR; Popl's compatibility list covers those models and later ones. The same list says an iPhone 7, 8 or X works only through the NFC reader in Control Center, and Popl's activation guide says older phones may not support NFC tapping at all. Show those phones your QR code.
Hold the Popl at the top of the back of the iPhone, the spot Popl's activation guide uses. When the read works, Apple says a notification pops up, and nothing opens until they tap it; a locked iPhone asks them to unlock first. Plenty of 'it didn't work' moments are a notification nobody tapped. Once the iPhone has been unlocked at least once since it was turned on, Apple says it scans for tags whenever the display is on, except when:
- The screen is off. Ask them to wake it before you tap.
- The camera is in use, for example because they opened it to scan your QR code.
- Wallet or Apple Pay is in use.
- The iPhone is in Airplane Mode.
- Another app is running its own NFC scan.
Cause 3: The Popl isn't activated to you, or the device is the problem
A Popl accessory has to be activated to your account before a tap can open your card. If it opens someone else's card, it may have been reassigned: Popl moves a device by choosing 'Deactivate' in its settings and activating it for the new person, and team accounts can activate devices for teammates. Ask your admin, or activate it again:
- Update the Popl app, go to the 'Settings' tab and tap 'Activate a Popl Device'.
- Choose whether the accessory is for you or for a teammate.
- iPhone: place the Popl on the top back of your phone. Android: turn NFC on first, then place it on the back middle of your phone.
- Or scan the QR code on the device and follow the steps. Popl says to check that the code isn't scratched or faded and that your lens is clean.
- Still nothing: Popl's refund policy says to contact its team if you are having trouble activating your Popl or popping to compatible phones. A Popl that loses its adhesive within the first 30 days of the order being marked as delivered qualifies for a replacement.
- Google's tap-to-pay help says a thick phone case can interrupt the NFC signal, so try once with the case off.
Cause 4: The QR code won't scan, or the page says 'Profile not found'
Popl's QR help says every Popl card has its own QR code, and that a downloaded or printed code always opens the specific card it was downloaded from.
- 'Profile not found': Popl says the card the code came from was deleted, or its link was changed, which breaks codes you already printed. Download a fresh code from your current card.
- It opens an older card: the code came from your other card. Download it again from the right one.
- Old colour or logo: Popl says printed codes don't update when you change those, though content edits do show up.
- On an iPhone: Apple's steps are to open the Camera app, hold the iPhone so the code appears, then tap the link. The 'Scan Code' control in Control Center works too.
- On an Android phone: on a Pixel, point the Camera app at the code and tap the bubble or link that appears. If none does, check that 'Camera scan suggestions' is on under the camera's 'More settings', or use the 'Scan QR code' tile in Quick Settings.
- Still won't read: Google's tips are to hold steady, avoid glare, wipe the lens and move closer while keeping the whole code on screen.
- The page won't load: Popl says sharing needs an internet connection, except in Offline Mode, which shares only your Contact Card.
Cause 5: They get a form, a single link, or a contact with nothing in it
If the tap or scan works but they see something other than your card, a setting is doing what it was told to.
- A form appears first: that is Lead Capture Mode, which shows the form before someone sees your card. Turn it off in the dashboard ('Lead Capture Mode') or in the app ('Collect Their Info First'). On a team, an admin or an Event's Data Capture settings may control it.
- Only one link opens: that is Single Link Mode, which Popl says sends anyone who taps, scans or opens your card link only to the single link you selected. At dash.popl.co, open the card, choose 'Links' and switch 'Single Link' off.
- Saving on iPhone: Popl's steps are to tap 'Save Contact', then 'View' to open the contact card, then 'Done' in the top right.
- Saving on Android: tap 'Save Contact' or 'Connect with me', then 'Save to Contacts', then 'Add Contact'.
- Details missing from the saved contact: Popl says it includes whichever links you've selected to appear. Edit your card, go to 'Add Content', add the 'Contact Card' link and switch on the details you want in it.
Cause 6: The Popl app won't sign you in or won't save your edits
Popl's account help suggests these, in this order:
- Use the email you signed up with, and try any other address you might have used.
- Stick to one sign-in method, such as 'Sign in with Apple'. Popl warns that mixing methods can cause syncing errors.
- Forgotten password: tap 'Sign in with email', then 'Forgot Password', and check spam or junk. If the reset link sends you back to the sign-in page, paste it into a different browser.
- Turn off any VPN or proxy, and switch from corporate or restricted Wi-Fi to home Wi-Fi or mobile data.
- Update the app, then fully close and reopen it.
- Can't edit your card: check you are signed in to the correct account under 'Settings' and have a stable connection, then restart the app. Scanner won't open: check the camera permission under 'Settings', 'Privacy', 'Camera', 'Popl'.
- Still stuck: tap 'Support' in the app's main menu, or go to 'Settings' and 'Help & Support', and choose 'Talk to a person'. Popl's chat runs 24/7, and email support is staffed Monday to Friday, 6 AM to 3 PM Pacific.
Make it work next time
A tap depends on the other phone. A QR code only needs a camera, so keep one ready.
- Lead with the QR code when you don't know the phone. It's on your Popl app's home page.
- Add your QR code to Apple Wallet or Google Wallet. Popl says this is open to all users: open the 'Cards' tab, tap the three-dot menu on your card, choose 'Add Card to Wallet' and tap 'Add'.
- Add Popl's QR code widget to your home screen. Popl says no subscription is required.
- Keep your card link handy so you can text it when a tap or a code fails.
- Don't change your card's link after printing QR codes.
- Before an event, test your Popl on one iPhone and one Android phone.
If you'd rather not depend on a tap
A OneSol digital business card is a free web page at a link like onesol.io/businesscard/yourname, with its own QR code that opens in any phone's camera and browser, and a 'Save contact' button that downloads a standard contact file, so nobody needs an app. OneSol doesn't sell NFC cards or tags, so it won't replace a Popl device, but your card's link can go on any NFC tag you already own that can hold a web link.
