You hold your Blinq card to someone's phone and nothing happens. Or your QR code won't scan, the contact never reaches their phone, or the app won't let you in.
Usually the card is fine. The cause is the phone doing the reading, or something changed on your side, like a card that was deleted or re-paired. Quick test: if a tap fails, have them scan the card's printed QR code. If that works, only the tap is the problem. Then find your symptom:
- Tapping the NFC card or badge does nothing: cause 1.
- The tap opens the wrong card or a dead page: cause 2.
- The QR code won't scan: cause 3.
- Your card opens, but the contact doesn't save: cause 4.
- The widget or wallet card is missing or out of date: cause 5.
- The app won't load or won't let you sign in: cause 6.
Cause 1: The other phone isn't reading the NFC card
A Blinq NFC card holds a link to your card, and the phone that touches it has to read the chip. Blinq's setup article says NFC is 'always on for iPhone 11+' and that 'Older iPhones (XS and earlier) can use the accessory's printed QR code instead.' Its NFC card page draws the line at 'iPhone XR, XS and all newer models'. Either way, show an older iPhone the QR code.
Apple's developer talk on background tag reading adds that an iPhone must have been unlocked once since it was switched on, reads tags while the display is on, and doesn't while 'Wallet or Apple Pay are in use, cameras are in use, or the device is in Airplane Mode.' So:
- iPhone: wake the screen, close the Camera app (an open camera stops the tap) and Wallet, and turn off Airplane Mode. Blinq says to hold the card near the top back, by the camera, until the notification appears. Then tap it.
- Android: Blinq says to check 'Settings > Connections > NFC', which is Samsung's wording. On a Pixel it is 'Connected devices' > 'Connection preferences' > 'NFC', with a switch called 'Use NFC'. On any brand, Google says to search Settings for 'NFC' and make sure it is on; no NFC setting means no NFC. Blinq says to tap the center of the back.
- Take the case off. Blinq says to 'try removing thick phone cases or magnetic attachments first'.
- Go slowly. Blinq's advice is to 'move the accessory slowly across the back of the phone since NFC antennas sit in different spots by model.'
Cause 2: The card is paired to the wrong card, or to one you deleted
If the tap opens an old card or a dead page, re-pair the accessory. Blinq says the steps are the same on iPhone and Android:
- Open the Blinq app, go to the Main menu and choose 'Pair NFC Device'.
- Tap your NFC card to the back of your phone.
- When the app confirms it, tap 'Select Card', swipe to the card you want and confirm with 'Pair with NFC Device'. If the accessory was linked to another card, the app asks you to 'Select a new card' to confirm the change.
- Deleted the card it pointed to? Blinq says 'The card's URL link and QR code will no longer work once this is done.' Re-pair to a live card, or email support@blinq.me with 'either the URL link or QR code of the deleted card' to have it restored.
- Using your own NFC sticker or tag? Blinq says it 'must be writable and compatible with standard NFC technology', and if it can't be encoded, 'it may be locked, faulty, or lack the capacity required.'
- Changed plans? Blinq says every accessory 'works out of the box with the two free profiles on Blinq Free.'
Cause 3: The QR code won't scan
Blinq already raises your screen brightness to full while you share, and when your connection drops, 'Blinq automatically switches your QR code to an offline version that scans without internet', then switches back when you reconnect. So a code that won't scan is usually down to the other phone's camera:
- iPhone: open the Camera app, hold it so the code is on screen, and tap the link that appears (Blinq calls it the yellow link). Or tap 'Scan Code' in Control Center; to add it, touch and hold the Control Center background, tap 'Add a Control' and choose 'Scan Code'.
- Pixel: in the Camera app, go to 'Settings' > 'More settings' and make sure 'Camera scan suggestions' is on, keep the entire code on screen and tap the link. You can also swipe down from the top and tap 'Scan QR code'. Other Android brands name these settings differently.
- Any phone: Google's tips are to keep your hand steady, scan in good light without shadows or glare, wipe a smudged lens, and move closer while keeping the whole code visible.
- Fails for everyone, printed codes too? Check the card wasn't deleted (cause 2).
Cause 4: Your card opens, but the contact doesn't save
Without Blinq, your card opens in their default browser and they tap 'Save Contact'. Most people stop one screen too early, and some Blinq behaviours look like a failed save:
- iPhone: tap 'Save Contact', then 'View' in the pop-up, then 'Done' on the contact preview.
- Android: tap 'Save Contact', choose 'Save to contacts', tap 'Download' to get the contact file (a .vcf), tap 'Open' when it finishes, and choose a Google account or device storage. On Samsung, Blinq says to enable notification permissions for the Contacts app if it isn't saving.
- They have the Blinq app: Blinq says your card then opens in their app and saves to their Blinq contacts, not the phone's own Contacts. To copy it across they go to 'Contacts', find you, tap 'More Actions' and choose 'Download contact to phone' (then 'Create a new contact' and 'Save' on Android).
- An App Clip opened: an iPhone without Blinq may show your card as an App Clip, and they can save your contact from there. Blinq says the App Clip is removed automatically after 30 days.
- A form appeared first: that is a lead form your company added. Blinq tells recipients to 'Select Skip if that option is available', and says 'Skipping doesn't cancel the connection.'
Cause 5: The widget or wallet card is missing or out of date
Blinq's widget and wallet guides have no troubleshooting steps, so remove a blank widget and add it again. A wallet pass needs no re-adding: Blinq says 'Your Wallet pass updates automatically whenever you edit the underlying Blinq Card'.
- iPhone widget: touch and hold the Home Screen background until the apps shake, tap '+' in the top left, choose Blinq, tap the widget you want, then 'Done'.
- Android widget: press and hold the Blinq app icon, choose the widgets option and drag the widget onto a home screen. If you have several cards, swipe through the widget to the one you want to share.
- Apple Wallet or Google Wallet: in the Blinq app, swipe to the card, tap 'Send', scroll to the bottom of the Send menu, choose 'Add card to wallet' and tap 'Add'.
Cause 6: The Blinq app won't load or won't let you sign in
Work through these in order. If none fixes it, contact Blinq through the chat widget at support.blinq.me or email support@blinq.me.
- Your phone's software. Blinq's requirements (as of 6 July 2026) are iOS 18.0 or later on an iPhone XR, XS, XS Max or newer, or Android 8.0 (Oreo) or higher.
- A VPN. Blinq says plainly: 'Blinq will not work if you have a VPN service enabled on your device.'
- Your sign-in method. Use the one you signed up with: email and password, or 'Continue with Google/Microsoft/Apple'.
- A forgotten password. In the app, tap 'Log in with existing account', enter your email and tap 'Forgot Password?' in the top right for a reset email. On a computer, use 'Forgot Password' and 'Send Reset Link' on the dashboard login page.
- An expired verification link. Blinq says you can have it resent at dash.blinq.me/resend-verification.
- A company account. With single sign-on turned on, Blinq says 'All users logging in with email addresses ending in your domain are directed to log in using SSO.' A password reset won't help; your IT admin can.
Make it work next time
Taps fail on old phones, through thick cases and at venues with no signal, so always carry a backup that needs only a camera or a text message.
- Save your QR code to your photos: in the app, tap 'Send' and choose 'Save QR code to photos'. On the dashboard, open the card, click 'Share card', then 'Download' next to the QR code.
- Lead with the QR code for older iPhones and thick cases.
- Keep your card's link ready to send by text or email.
- Before an event, test on one iPhone and one Android phone, all the way through 'Save Contact' into the Contacts app.
- Re-pair any accessory before you delete the card it points to.
If you'd rather have a card with fewer moving parts
For a card that opens on any phone, a OneSol digital business card is a free web page with its own QR code and a 'Save contact' button that adds you to the other person's contacts, with no app needed on either side. OneSol doesn't sell NFC cards and has no Apple Wallet or Google Wallet pass, so you share it by link or QR code, or from an NFC tag you already own that can hold a web link.
